Organic plant food pellet making machine for high wetness products
High-moisture product natural fertilizer quickly organic fertilizer pellet making maker is also called wet mixing tooth organic plant food pellet making machine, internal revolving mixing tooth granulator, this granulator is a fertilizer pellet making equipment
Wet natural fertilizer granulator is commonly used in the granulation of organic plant food. Due to the high granulation rate, stable operation, tough and long lasting tools, long service life, and secure base layout, it runs much more efficiently, so it is picked as the suitable item by the bulk of users.
The specs as well as versions of the wet organic plant food pellet making maker are 400, 600, 800, 1000, 1200, 1500 as well as other requirements, and can additionally be personalized according to customer demands.
Related post: organic fertilizer making machine
1. Working concept of organic fertilizer pellet making machine
The mixing tooth natural plant food pellet making device utilizes the mechanical stirring pressure of high-speed rotation as well as the resulting wind resistant force to make the great powder material constantly understand the procedures of blending, granulation, spheroidization, as well as densification in the machine, so regarding achieve the purpose of granulation.
The fragment shape is round, the bit size is typically between 1.5 ~ 4 mm, and also the granulation rate of 2 ~ 4.5 mm bits is ≥ 90%. The particle size can be readjusted appropriately by the product blending quantity as well as the pin rate. Normally, the lower the mixing amount, the quicker the speed. High, the smaller sized the bits, and also the other way around the larger the bits.
The mixing tooth natural fertilizer pellet making machine refines the fermented natural basic materials right into granules. Compared with the disc granulator, the yield is higher, the granules are consistent, smooth, high in strength and also low in water material. The temperature level after developing is about 30 degrees.
Related post: https://www.richipelletmachine.com/organic-fertilizer-pellet-making-machine/
After the fermented basic materials are pulverized, they are mixed with a mixer so that the moisture material of the product is between 35% and 40%. After going into the natural plant food pellet making machine, round particles can be processed.
It benefits from the reality that organic plant food raw materials are inlaid with each other under a particular impact, as well as the fragments created are rounded, smooth and also high in toughness. Needed additives and adhesives can additionally be included in more boost product top quality.
The natural fertilizer raw materials ideal for the mixing tooth organic plant food making maker consist of: animals and also poultry manure, garden compost plant food, eco-friendly manure, sea fertilizer, cake plant food, peat, soil and various fertilizer, 3 wastes, microorganisms and also municipal solid waste, etc.
The certified granulation rate of this natural fertilizer pellet making machine is as high as 90% or more, and also it appropriates for a variety of various solutions. This equipment is most appropriate for direct granulation of natural fertilizer after fermentation, leaving out the drying procedure and also considerably reducing the manufacturing price. As a result, the mixing tooth organic fertilizer pellet machine is favored by the bulk of individuals.
The natural fertilizer granulator maker generated by our firm remains in short supply, energy conserving as well as environmental management are trustworthy!
Related post: tofu cat litter factory
2. The extent of application of organic plant food pellet making device
Yard charcoal, sludge, livestock manure, lignite, fermented straw, etc are utilized as basic materials for organic plant food production as well as granulation. The above information are based on peat, animals manure, as well as fermented straw, and other raw materials undergo speculative information.
3. Installation of plant food pelletizer equipment.
( 1 )Installation: The organic plant food pellet making device requires to pour concrete foundation before installation to facilitate the transfer of completed materials, and also fix as well as bonded the organic fertilizer pellet making machine as well as the ingrained iron together to avoid the granulator from moving; channel steel can also be made use of to weld the chassis.
Location the granulator on the bottom structure; it is likewise possible to dig a pit for product transportation.
( 2 )Commissioning: After the natural plant food pellet making device is set up, it is required to check whether the parts of the granulator are secured. Then execute the no-load trial run. Throughout the trial run, there must be no massaging or touching, no unusual sound, as well as no resonance.
The temperature level of each bearing of the natural fertilizer pellet mill need to increase continuously. At the end of the trial run, the temperature of each part ought to not be more than 50 ℃. There have to be no serious deterioration. When the trial run is in regular production, it should be fed equally.
( 3) Maintenance of organic fertilizer pellet making device:
a. The bearing is oiled when per shift. The lubricating oil type is No. 3 calcium-based oil lubricating oil, as well as the filling up quantity is 1/3 ~ 1/2. The brand-new lubricating oil ought to be changed on a regular basis. The organic plant food pellet making machine bearing must be washed when replacing.
b. Lubricating oil should be included before the reducer is utilized. The lubricating oil is typically HJ40-50 mechanical oil, and also HL20-30 gear oil can also be used. The oil degree of the lubricating oil need to be within the variety indicated by the round oil mark on the device base.
After the initial refueling operation for 100 hours, the new oil should be changed, as well as every 6 months thereafter, and also the oil should be cleaned up when changing the oil.
( 4) Using parts:
a. triangular belt
b. Bearings
c. Stirring head
4. Directions for use fertilizer pelletizer
Before beginning the natural fertilizer pellet making maker, inspect whether the connection of the machine hangs, and pay unique interest to whether the stirring head is loose.
The natural plant food pellet making equipment is purely restricted to begin with load.
When the natural plant food making device is switched off, quit feeding first, and shut off the power after the material in the device is entirely released. Long-lasting shelving is not essential to remove the materials in the body to avoid sticking.
It is strictly prohibited for iron blocks, rocks, wooden sticks and also various other sundries to enter the device to stop damages to the device.
When beginning the primary motor, first take notice of the tightness of the V-belt. If the V-belt slips when it is too loose, the natural plant food pellet making device will certainly not revolve normally.
If it is too tight, the service life of the natural fertilizer pellet making machine bearing as well as the V-belt will be influenced. Then inspect whether the turning direction is proper, if it revolves in the opposite instructions, quit as well as adjust right away.
For details please contact: Richi Machinery
WhatsApp：86 138 3838 9622
Email：enquiry@richipelletmachine.com