Excellent marketing in Indonesia totally wood biomass pellet assembly line rate

The  rate of the biomass pellet line is  figured out by the  resources  made use of. For example, if the raw  products are branches  and also trunks with high  wetness  material, they  ought to be  damaged -  smashed -  dried out - granulated - packed - shipped. It mainly depends on what  resources are  utilized. 350  kind biomass pellet  maker  tools 38,000,  design: 350 type 300 ~ 500 kg per  hr, 450 type 500 ~ 800 kg, 560 type 1 ~ 1.5 tons, 600  kind 2  lots, 850  kind 3 ~ 4  heaps.

The  great selling in Indonesia biomass pellet line rate relies on your  basic materials and  outcome  dimension.  First off, you need to  understand what your  basic materials are. The raw  products are  prefabricated sawdust or wood chips and the moisture  material of the materials is 10%-15%. A  manufacturing facility  used new technology  timber pellet  device  suffices. If your raw materials are unprocessed logs, branches, etc  require to be pulverized by a wood chipper and biomass crusher,  after that  dried out in a dryer (if the moisture  surpasses 15%, it  requires to be  dried out),  after that the  major machine is granulated,  and after that the  product packaging  equipment packs this  collection of  assembly line.

Knowing your  basic materials  has to do with the output. The  outcome of the biomass pellet mill machine is different  as well as the  design is different, so the price is  additionally different. The biomass pellet assembly line price is not only a matter of reporting a number,  yet it is  needed to formulate a  strategy and quotation according to your requirements.

First off, the raw material moisture  demands of  timber pellets are  extremely strict. The  dampness  material of the  product is too high, which blocks the die holes, so that the  bits can not be produced; if the  wetness content of the  product is  also  reduced, if it is too  completely dry, it is  difficult to  create,  and also the viscosity is  insufficient.

Normally 12%-13%, 15-20% of the raw material moisture after  inflection is the  criterion for pressing wood pellets. If the raw material  wetness is  too expensive, the mold resistance  and also slipping  sensation will  happen after the raw  product enters the biomass pelletizer ring  pass away;  take note of  regulate the moisture content of the raw material  prior to  going into the biomass pelleting  equipment, If the water  web content is  too expensive, there  will certainly be slippage in the ring die,  causing the phenomenon that it is  hard to  release.

For more details: Richi Machinery

Email Address: enquiry@pellet-richi.com

Phone/Whatsapp: 0086-13838389622

If your  resources  wetness meets the  needs, a biomass wood pellet press machine can produce wood pellets. If it does not meet the  needs, it needs to be dried, so it needs to be  outfitted with a  timber  clothes dryer  and also a  warm blast  cooktop.  Obviously this is if your  resources is wood chips. If your  resources is  timber chips (thickness less than 0.5 mm), it  requires to be pulverized, which is equivalent to  including  an additional process. Some  clients' raw materials are bark, which is  additionally possible after  including a wood pulverizer.

However, some  consumers'  basic materials are  timber scraps, because the price of wood scraps is cheap  and also  simple to  acquire, so there are many  situations, then it is  essential to add a  timber chipper, first to  reduce the non-standard wood scraps  right into  timber chips, and then  most likely to  squash.

More details: https://www.pellet-richi.com/wood-pellet-machine/biomass-pellet-production-line.html

For some customers whose  resources are waste building  design templates, it is necessary to  transform the wood chipper to a bamboo plywood crusher.

Because the bamboo plywood itself has  numerous iron nails, it is  really  simple to damage the knife on the  timber chipper when  utilizing a wood chipper.  An additional reason is that the waste building  layout is  fairly  large, and the feed port of the  timber chipper is  usually 1250px.

It is impossible to  by hand break it  ahead of time, right? The bamboo plywood crusher can  get in any bamboo plywood with a feed opening of less than 1.25 m,  as well as the gnawing knife of the bamboo plywood crusher is an ingot knife, and the iron nails have little  impact on him.

Unlike  timber chippers, the blades are  quickly damaged. Bamboo plywood is  additionally an  benefit of making wood pellets.  Usually, its  dampness  web content is very small,  in between 15-20%. Therefore,  making use of bamboo plywood as pellets saves the  difficulty of  timber drying machines.